Wanna buy » Model Year Info - Derived From Chassis Number?

If you're interested in buying a Multistrada, this is the place to post questions about the bike.
Stnigwray


Posts: 3
Joined: Sat Oct 20, 2007 6:27 am
Location: UK

Post Posted:

I am interested in a used Multistrada and have noticed there are a few significant improvements to the 2005 model year machine. Does anyone know how you can obtain the model year from the chassis number?
Scrambles
2006 1000 DS (Red)

User avatar

Posts: 2710
Joined: Tue Oct 17, 2006 5:26 pm
Location: Plumsteadville, PA
Contact:

Post Posted:

Yes, the VIN number has the model year:
  • Manual VIN Decode
    17 digit VIN numbers can be decoded by breaking it first into 6 fields and then using the decode tables below to translate the VIN (vehicle identification number) into a description. Several of the fields are manufacturer specific and are not included in the tables below:

    • 1. Character #1, length 3 of the VIN number is the World Manufacturer Identifier (WMI) the first character is the country, the next 1 or 2 designates the manufacturer. (see table below)
      2. Character #4, length 5 of the VIN number is the body style or features, which varies by manufacturer
      3. Character #9, length 1 of the VIN number is a check digit, which helps programs verify that the VIN has been entered accurately
      4. Character #10, length 1 of the VIN number is the model year (see table below)
      5. Character #11, length 1 of the VIN number identifies the assembly plant
      6. Character #12, length 6 of the VIN number is the manufacturer sequence number
    • Model Year, Position #10
      J 1988
      K 1989
      L 1990
      M 1991
      N 1992
      P 1993
      R 1994
      S 1995
      T 1996
      V 1997
      W 1998
      X 1999
      Y 2000
      1 2001
      2 2002
      3 2003
      4 2004
      5 2005
      6 2006
      7 2007
      8 2008
This is based on ISO rules, so I'm pretty sure they're the same in the UK as well. ( www.iso.org , in particular ISO 3799, ISO 4030, and ISO 8357)
Man - Machine - Heaven
Stnigwray


Posts: 3
Joined: Sat Oct 20, 2007 6:27 am
Location: UK

Post Posted:

Perfect, thanks very muchly..................
Post Reply